RF directional coupler, 30 dB, 1–18 GHz, 50 W, N-Type female connectors

RF directional coupler 30 dB engineered for professional power monitoring and test & measurement in RF systems where a rugged interface and reliable power handling are required. With its N-Type female connectors, this model is a practical choice for bench setups and field-ready installations that use standard N-Type cabling.

The DC-30-0118-N covers 1 to 18 GHz at 50 Ω, supporting common RF chains used in telecom, industrial RF and general-purpose microwave testing. The mechanical interface follows MIL-STD-348A, ensuring predictable mating and compatibility with professional instrumentation and assemblies.

Electrical performance

With a nominal 30 dB coupling, the coupled port provides a relatively high sample level, useful when connecting power meters or monitoring receivers without adding external gain. The coupler maintains VSWR ≤ 1.60 across the operating band, helping keep reflections under control. A directivity ≥ 10 dB supports meaningful separation of forward and reflected power for monitoring tasks.

On the main line, insertion loss is limited to 1.2 dB, minimizing impact on system link budgets. For wideband measurements, a coupling flatness ≤ ±1.0 dB improves consistency across frequency, which is especially relevant in swept tests and broadband verification.

Power handling, robustness and operating environment

The coupler supports up to 50 W continuous input power, making it suitable for moderate-power RF chains and production verification where thermal margins matter. The construction is designed for professional RF environments, with an aluminum alloy housing and stainless-steel connector bodies.

Operating temperature is specified from -40 °C to +85 °C. The product is compliant with RoHS 3 and REACH, easing integration into regulated applications.

Applications and selection guidance

A 30 dB directional coupler is typically selected when only a very small signal sample is required on the monitoring path, for example for non-intrusive measurements or to minimize loading on the main transmission line. It is especially suitable when operating at higher power levels or when preserving RF path integrity is critical.

Measurement data

The datasheet includes typical S-parameter curves for the 30 dB configuration across the full band, supporting quick validation during system integration and acceptance testing.

Typical applications

• Forward and reflected power sampling in RF chains up to 18 GHz
• Power monitoring loops for transmitters, driver stages and RF subsystems
• Production test and verification in automated test equipment (ATE)
• Broadband amplifier characterization and swept measurements
• Laboratory setups using N-Type cabling and standard RF instrumentation
• Telecom, industrial RF and general-purpose microwave test systems