Shielding finger-stock gaskets
More informations
The fingers are used where it is required a secure and reliable contact between a fixed and a mobile part or between a fixed and sliding one. They are usually mounted on the fixed part while the mobile part (for example the cover of a box) when close make a pressure on the finger to ensure a safe and reliable contact because each finger, which is separated from its next, perfectly fit the imperfections of edges. Another example of application of finger can be seen in some boxes where the cover ensures the contact on each finger.
 |
FINGER-STOCK FOR CAVITIES The fingers of FINGER-Bx series are in beryllium-copper so they are suitable for sliding contact inside transmitting cavities or cavity filters, the copper-beryllium is the best material for this type of use in fact it has either very good electrical conductivity and mechanical durability. |
Bombatura sferica per migliorare il contatto |
Laird 97-958-21
Laird 97-958-21
- N
-
150 mm (5.9 in)
-
5.4 mm (2.13 in)
-
1.5 mm (0.06 in)
-
4.2 mm (0.17 in)
-
clip-on
-
BeCu
-
clean & bright
- N
-
89 mm (3.5 in)
-
9 mm (0.35 in)
-
3.5 mm (0.14 in)
-
7 mm (0.275 in)
-
stick-on
-
BeCu
-
tin plated
- N
-
119 mm (4.7 in)
-
9 mm (0.35 in)
-
3.5 mm (0.14 in)
-
7 mm (0.275 in)
-
stick-on
-
BeCu
-
tin plated
- N
-
149 mm (5.9 in)
-
9 mm (0.35 in)
-
3.5 mm (0.14 in)
-
7 mm (0.275 in)
-
stick-on
-
BeCu
-
tin plated
Tech-Etch 187W35-9.17-01
Tech-Etch 500P110-18-02-MOD
Tech-Etch 375S80-15.75-02
Tech-Etch 187W35-21.3-02
Tech-Etch 187P32-6.5-02
- N
Tech-Etch 165T-24-02