JST10G3S7VMZ-SMP - Ultra wideband amplifier, 9 kHz - 15 GHz, SMA female

Main features:

• This amplifier has a very wide band extended on six decades.
• It can be used in a lab as preamplifier, for example on spectrum analizers where the NF is about 25-30dB, it improves the S/N ratio of about 20 dB and allows to see signals under 0.1μV.
• It is suitable as small power amplifier for instruments with +17/+18dBm output or as high insulation buffer stage, or even as spare part for a final amplifier stage of RF generators and microwave sweep generators, due to its small size it can be put directly into the instrument.
• For EMI/EMC measurements, as driver for other wide band power amplifiers.
• Very fast pulse amplifier, where it is required a very small recovery time even with medium level signals.
• Frequency hopping / jamming , as antenna preamplifier, local oscillator amplifier, etc…
• For medical, nuclear and general physics applications.
• The amplifier is supplied with connectors already mounted.
• The connectors can be easily removed to allow the amplifier to be inserted in a printed circuit board for customized applications or to replace them.

Attention: It needs to be mounted on an adequate heat sink for correct operation.

Specifications:

Size and connections:

The diagram shows also the quotes for mounting the amplifier directly on the printed circuit board by removing the connectors.

Gain & Noise figure Vs. Frequency (3 - 18 GHz)

Gain & Noise figure Vs. Frequency (10 - 3000 MHz)

Gain Vs. Frequency (9 kHz - 10 MHz)