The product has been added to cart
Product added to compare list
Maximum number of comparable products was reached
In this section are described the power chip attenuators, characterized by a good precision, the full continuous power can be reached only by adding a quite big heat-sink or a cooling fan.
The heat-sink used in the mounting examples is not adequate for a continuous usage, the pictures show the prototypes made and tested in our lab only for exemplification purpose, the attenuators are supplied in their original packege without the heat-sink. The tracks of the p.c. board are at 50Ω and for a better dissipation we strongly suggest to mount the attenuators in the center of the heat sink surface.
Order code: | ATTC-00DB-YAT |
---|---|
|
0 dB SMD chip attenuator Mini-Circuits YAT-0+ |
Mounting: | SMD |
Impedance: | 50 Ohm |
Attenuation: | 0 dB |
Maximum frequency: | 18 GHz |
Power: | 2 W |
Order code: | ATTC-02DB-75-G |
---|---|
|
2 dB thick film attenuator with leads |
Conditions: | N (The product is brand new) |
Mounting: | thru-hole |
Impedance: | 75 Ohm |
Attenuation: | 2 dB |
Maximum frequency: | 500 MHz |
Order code: | ATTC-02DB-B |
---|---|
|
2 dB chip attenuator on alumina board EMC Technology TS0302T3 |
Conditions: | N (The product is brand new) |
Mounting: | SMD |
Impedance: | 50 Ohm |
Attenuation: | 2 dB |
Maximum frequency: | 18 GHz |
Power: | 1 W |
Order code: | ATTC-03DB-150-G |
---|---|
|
3 dB thick film attenuator with leads |
Conditions: | N (The product is brand new) |
Mounting: | thru-hole |
Impedance: | 150 Ohm |
Attenuation: | 3 dB |
Maximum frequency: | 500 MHz |
Order code: | ATTC-03DB-D |
---|---|
|
3 dB chip attenuator on alumina board |
Conditions: | N (The product is brand new) |
Mounting: | SMD |
Impedance: | 50 Ohm |
Attenuation: | 3 dB |
Maximum frequency: | 2 GHz |
Power: | 1 W |
Order code: | ATTC-03DB-YAT |
---|---|
|
3 dB SMD chip attenuator Mini-Circuits YAT-3+ |
Mounting: | SMD |
Impedance: | 50 Ohm |
Attenuation: | 3 dB |
Maximum frequency: | 18 GHz |
Power: | 2 W |
Order code: | ATTC-04DB-D |
---|---|
|
4 dB chip attenuator on alumina board |
Conditions: | N (The product is brand new) |
Mounting: | SMD |
Impedance: | 50 Ohm |
Attenuation: | 4 dB |
Maximum frequency: | 2 GHz |
Power: | 1 W |
Order code: | ATTC-04DB-E |
---|---|
|
4 dB chip attenuator on quartz board |
Conditions: | N (The product is brand new) |
Mounting: | SMD |
Impedance: | 50 Ohm |
Attenuation: | 4 dB |
Maximum frequency: | 5 GHz |
Power: | 500 mW |
Order code: | ATTC-04DB-YAT |
---|---|
|
4 dB SMD chip attenuator Mini-Circuits YAT-4+ |
Mounting: | SMD |
Impedance: | 50 Ohm |
Attenuation: | 4 dB |
Maximum frequency: | 18 GHz |
Power: | 2 W |
Order code: | ATTC-06DB-150-G |
---|---|
|
6 dB thick film attenuator with leads |
Conditions: | N (The product is brand new) |
Mounting: | thru-hole |
Impedance: | 150 Ohm |
Attenuation: | 6 dB |
Maximum frequency: | 500 MHz |
Order code: | ATTC-06DB-75-G |
---|---|
|
6 dB thick film attenuator with leads |
Conditions: | N (The product is brand new) |
Mounting: | thru-hole |
Impedance: | 150 Ohm |
Attenuation: | 6 dB |
Maximum frequency: | 500 MHz |
Order code: | ATTC-06DB-A |
---|---|
|
6 dB cylindrical attenuator |
Conditions: | N- (The product is brand new but it comes from an old production) |
Mounting: | solder |
Impedance: | 50 Ohm |
Attenuation: | 6 dB |
Maximum frequency: | 26 GHz |
Power: | 4 W |
Order code: | ATTC-06DB-D |
---|---|
|
6 dB chip attenuator on alumina board |
Conditions: | N (The product is brand new) |
Mounting: | SMD |
Impedance: | 50 Ohm |
Attenuation: | 6 dB |
Maximum frequency: | 2 GHz |
Power: | 1 W |
Order code: | ATTC-06DB-K |
---|---|
|
6 dB chip attenuator on alumina board |
Conditions: | N (The product is brand new) |
Mounting: | SMD |
Impedance: | 50 Ohm |
Attenuation: | 6 dB |
Maximum frequency: | 2 GHz |
Power: | 1 W |
Order code: | ATTC-07DB-75-G |
---|---|
|
7 dB thick film attenuator with leads |
Conditions: | N (The product is brand new) |
Mounting: | thru-hole |
Impedance: | 75 Ohm |
Attenuation: | 4 dB |
Maximum frequency: | 500 MHz |
Order code: | ATTC-08DB-D |
---|---|
|
8 dB chip attenuator on alumina board |
Conditions: | N (The product is brand new) |
Mounting: | SMD |
Impedance: | 50 Ohm |
Attenuation: | 8 dB |
Maximum frequency: | 2 GHz |
Power: | 1 W |
Order code: | ATTC-08DB-YAT |
---|---|
|
8 dB SMD chip attenuator Mini-Circuits YAT-8+ |
Mounting: | SMD |
Impedance: | 50 Ohm |
Attenuation: | 8 dB |
Maximum frequency: | 18 GHz |
Power: | 2 W |
Order code: | ATTC-10DB-AT |
---|---|
|
10 dB attenuator in 8-pin metallic case Mini-Circuits AT-10 |
Conditions: | N (The product is brand new) |
Mounting: | thru-hole |
Impedance: | 50 Ohm |
Attenuation: | 10 dB |
Maximum frequency: | 1.5 GHz |
Power: | 1 W |
Order code: | ATTC-12DB-YAT |
---|---|
|
12 dB SMD chip attenuator Mini-Circuits YAT-12+ |
Mounting: | SMD |
Impedance: | 50 Ohm |
Attenuation: | 12 dB |
Maximum frequency: | 18 GHz |
Power: | 1.8 W |
Order code: | ATTC-15DB-YAT |
---|---|
|
15 dB SMD chip attenuator Mini-Circuits YAT-15+ |
Mounting: | SMD |
Impedance: | 50 Ohm |
Attenuation: | 15 dB |
Maximum frequency: | 18 GHz |
Power: | 1.6 W |
Order code: | ATTC-16DB-150-G |
---|---|
|
16 dB thick film attenuator with leads |
Conditions: | N (The product is brand new) |
Mounting: | thru-hole |
Impedance: | 150 Ohm |
Attenuation: | 13 dB |
Maximum frequency: | 500 MHz |
Order code: | ATTC-16DB-75-G |
---|---|
|
16 dB thick film attenuator with leads |
Conditions: | N (The product is brand new) |
Mounting: | thru-hole |
Impedance: | 75 Ohm |
Attenuation: | 16 dB |
Maximum frequency: | 500 MHz |
Order code: | ATTC-20DB-A |
---|---|
|
20 dB cylindrical attenuator |
Conditions: | N- (The product is brand new but it comes from an old production) |
Mounting: | solder |
Impedance: | 50 Ohm |
Attenuation: | 20 dB |
Maximum frequency: | 26 GHz |
Power: | 4 W |
Order code: | ATTC-20DB-N |
---|---|
|
20 dB chip attenuator KDI-Triangle A3RE90-20 |
Conditions: | N (The product is brand new) |
Mounting: | SMD |
Impedance: | 50 Ohm |
Attenuation: | 20 dB |
Maximum frequency: | 2 GHz |
Power: | 1 W |
Order code: | ATTC-20DB-YAT |
---|---|
|
20 dB SMD chip attenuator Mini-Circuits YAT-20+ |
Mounting: | SMD |
Impedance: | 50 Ohm |
Attenuation: | 20 dB |
Maximum frequency: | 18 GHz |
Power: | 1.5 W |
Order code: | ATTC-23DB-C |
---|---|
|
23 dB chip attenuator on alumina board |
Conditions: | N (The product is brand new) |
Mounting: | SMD |
Impedance: | 50 Ohm |
Attenuation: | 23 dB |
Maximum frequency: | 500 MHz |
Power: | 500 mW |
Order code: | ATTC-30DB-A |
---|---|
|
30 dB cylindrical attenuator |
Conditions: | N- (The product is brand new but it comes from an old production) |
Mounting: | solder |
Impedance: | 50 Ohm |
Attenuation: | 30 dB |
Maximum frequency: | 26 GHz |
Power: | 4 W |
Order code: | ATTC-30DB-YAT |
---|---|
|
30 dB SMD chip attenuator Mini-Circuits YAT-30+ |
Mounting: | SMD |
Impedance: | 50 Ohm |
Attenuation: | 30 dB |
Maximum frequency: | 18 GHz |
Power: | 1.3 W |
Order code: | ATTC-33-1001-15 |
---|---|
|
15 dB chip attenuator with flange RF Florida 33-1001-15.00 |
Conditions: | N (The product is brand new) |
Mounting: | flange |
Impedance: | 50 Ohm |
Attenuation: | 15 dB |
Maximum frequency: | 4 GHz |
Power: | 20 W |
Order code: | ATTC-ATC01DB |
---|---|
|
Flange mount attenuator, 1dB, 150W, dc-3GHz ATC / Kyocera AVX FA10975P01DBFBK |
Conditions: | N (The product is brand new) |
Mounting: | flange |
Impedance: | 50 Ohm |
Attenuation: | 1 dB |
Maximum frequency: | 3 GHz |
Power: | 150 W |
Order code: | ATTC-ATC02DB |
---|---|
|
Flange mount attenuator, 2dB, 150W, dc-3GHz ATC / Kyocera AVX FA10975P02DBFBK |
Conditions: | N (The product is brand new) |
Mounting: | flange |
Impedance: | 50 Ohm |
Attenuation: | 2 dB |
Maximum frequency: | 3 GHz |
Power: | 150 W |
Order code: | ATTC-ATC03DB |
---|---|
|
Flange mount attenuator, 3dB, 150W, dc-3GHz ATC / Kyocera AVX FA10975P03DBFBK |
Conditions: | N (The product is brand new) |
Mounting: | flange |
Impedance: | 50 Ohm |
Attenuation: | 3 dB |
Maximum frequency: | 3 GHz |
Power: | 150 W |
Order code: | ATTC-ATC06DB |
---|---|
|
Flange mount attenuator, 6dB, 150W, dc-3GHz ATC / Kyocera AVX FA10975P06DBFBK |
Conditions: | N (The product is brand new) |
Mounting: | flange |
Impedance: | 50 Ohm |
Attenuation: | 6 dB |
Maximum frequency: | 3 GHz |
Power: | 150 W |
Order code: | ATTC-ATC10DB |
---|---|
|
Flange mount attenuator, 10dB, 150W, dc-3GHz ATC / Kyocera AVX FA10975P10DBFBK |
Conditions: | N (The product is brand new) |
Mounting: | flange |
Impedance: | 50 Ohm |
Attenuation: | 10 dB |
Maximum frequency: | 3 GHz |
Power: | 150 W |
Order code: | ATTC-ATC17DB |
---|---|
|
Flange mount attenuator, 17dB, 150W, dc-3GHz ATC / Kyocera AVX FA10975P17DBFBK |
Conditions: | N (The product is brand new) |
Mounting: | flange |
Impedance: | 50 Ohm |
Attenuation: | 17 dB |
Maximum frequency: | 3 GHz |
Power: | 150 W |
Order code: | ATTC-ATC20DB |
---|---|
|
Flange mount attenuator, 20dB, 150W, dc-3GHz ATC / Kyocera AVX FA10975P20DBFBK |
Conditions: | N (The product is brand new) |
Mounting: | flange |
Impedance: | 50 Ohm |
Attenuation: | 20 dB |
Maximum frequency: | 3 GHz |
Power: | 150 W |
Order code: | ATTC-ATC30DB |
---|---|
|
Flange mount attenuator, 30dB, 150W, dc-3GHz ATC / Kyocera AVX FA10975P30DBFBK |
Conditions: | N (The product is brand new) |
Mounting: | flange |
Impedance: | 50 Ohm |
Attenuation: | 30 dB |
Maximum frequency: | 3 GHz |
Power: | 150 W |
Order code: | ATTC-H100NA20 |
---|---|
|
20 dB chip attenuator with flange Anaren H100NA20X4 |
Conditions: | N (The product is brand new) |
Mounting: | flange |
Impedance: | 50 Ohm |
Attenuation: | 20 dB |
Maximum frequency: | 4 GHz |
Power: | 100 W |
Order code: | ATTC-RPA50-10 |
---|---|
|
10 dB chip attenuator with flange |
Conditions: | N (The product is brand new) |
Mounting: | flange |
Impedance: | 50 Ohm |
Attenuation: | 10 dB |
Maximum frequency: | 2.5 GHz |
Power: | 50 W |