These attenuators are often used to set up test or calibration benches, the attenuation value is optimized by adjusting the tuning screw, once the desired value is found the tuning screw is locked by the tightening nut.
Minimum attenuation
- 0.20 dB @ 1 GHz
- 0.30 dB @ 1.5 GHz
- 0.35 dB @ 2 GHz
- 0.40 dB @ 5 GHz
- 0.60 dB @ 8 GHz
- 0.70 dB @ 10 GHz
Maximum attenuation
- 9 dB @ 1 GHz
- 20 dB @ 1.5 GHz
- 35 dB @ 2 GHz
- 40 dB @ 5 GHz
- 46 dB @ 8 GHz
- 50 dB @ 10 GHz
Maximum attenuation diagram